New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Orlando Homeowners Choose Therma-Tru Windows & Doors
Hale Windows Orlando provides independent Therma Tru in Orlando entry door and patio door service, from diagnosis and repair to full replacement. We work on Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse lines every week, and because we’re not tied to Therma-Tru as an authorized dealer, we fix what’s actually failing rather than steering you toward a product you don’t need. Spencer Odell and our crew know how Orlando’s humidity, afternoon thunderstorms, and hurricane-season wind loads age these doors. Call (850) 613-9382 and we’ll give you a written price before any work starts.
Therma-Tru makes some of the most widely installed fiberglass entry doors in the country. They’re a solid product, but Orlando tests them in ways a showroom brochure never will. Our job is to keep them sealing, swinging, and latching the way they should.
Key takeaways:
- We service all major Therma-Tru door lines: Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse
- We’re an independent service provider, not a Therma-Tru authorized dealer – we repair honestly, not by brand agenda
- We stock genuine Therma-Tru weatherstripping, corner seals, and sills, plus equivalent aftermarket hardware where it makes sense
- Every job gets a written price before work begins, backed by the 365-Day Done Right Promise
- Call (850) 613-9382 for a free estimate on any Therma-Tru door in Orlando
Why Trust Hale Windows Orlando for Your Therma-Tru Windows & Doors?
Our Orlando crew has been pulling Therma-Tru doors apart and putting them back together for years. Spencer Odell learned the trade at Los Angeles Trade-Technical College and has spent the better part of two decades installing and repairing doors across Central Florida, from bungalows in College Park to newer builds out past Lake Nona. That experience means we know the difference between a door that’s failing because of a cheap sweep and one that’s failing because the slab itself has absorbed too much Florida moisture. If the numbers and the warranty language don’t back it up, we won’t say it.
What we bring to Therma-Tru work specifically: genuine Therma-Tru replacement parts when a factory fit matters (weatherstripping, corner seals, adjustable sills), and equivalent aftermarket hardware when it matches or exceeds the original spec (hinges, sweeps, lock components). We don’t guess. We open the door, find the actual cause, and tell you what it costs to fix. You get a written price before we touch anything. Every technician who comes to your door is background-checked, identity-verified, photo-badged, and pre-announced by name and photo, so you know exactly who’s showing up before you open the door. We also answer calls live, 24/7. No voicemail.
Common Therma-Tru Windows & Doors Problems We Fix in Orlando
Here’s what we actually see on Therma-Tru doors in Orlando, week after week:
- Warped or swollen door slabs on older Fiber-Classic models. Orlando’s humidity gets into the composite core over time, especially if the door’s bottom sweep has hardened and let storm-driven rain get behind it. You’ll notice the door binding at the latch or hinge side, usually worse during summer. Sometimes we can shim and adjust; sometimes the slab is too far gone.
- Cracked or separated corner joints on Classic-Craft doors. West-facing entries in Orlando take direct afternoon sun, and the composite stiles and rails expand and contract at different rates. Over years, the corner joint starts to open. If caught early, we can reseat and seal it. If it’s advanced, the door loses structural integrity and replacement becomes the honest recommendation.
- Worn or flattened weatherstripping on Smooth-Star doors. This is the most common call we get. Florida sun and heat bake the rubber until it no longer rebounds. The door still looks fine, but you’ve got drafts, moisture, and a higher AC bill. Genuine Therma-Tru replacement weatherstripping fixes it same day.
- Failing multi-point lock mechanisms on Pulse doors. The shoot bolts won’t fully engage, or the lock cylinder freezes after years of Orlando humidity and dust. Sometimes it’s a simple lubrication and adjustment; other times the gearbox inside the lock has worn out. We stock replacement components and can usually restore full function without replacing the entire door.
- Rotten bottom rails on any Therma-Tru door. Water pools at the threshold during Orlando’s afternoon downpours. If the sweep failed and the door wasn’t caulked right, the bottom rail rots from the inside. This is one where we’ll tell you straight: a rotten bottom rail usually means replacement, because the slab’s structural integrity is already compromised.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use genuine Therma-Tru replacement weatherstripping, corner seals, and adjustable sills when the repair calls for a factory-fit part. Therma-Tru designs those components specifically for their door profiles, and aftermarket versions rarely seat as cleanly. That matters when you’re trying to keep Orlando’s humid air and driving rain outside where it belongs.
For hardware like hinges, sweeps, and multi-point lock components, we often install equivalent aftermarket parts that match or exceed the original spec. This keeps costs down without sacrificing function, and we’ll tell you before we make the swap.
Here’s our honest repair-vs-replace stance: if the door slab is solid and square, we repair the frame, seal, or hardware. If the slab itself is warped, cracked, or delaminating, replacement is usually the better long-term call. We’ll show you exactly what we’re seeing and give you a written price either way. Call (850) 613-9382 and we’ll assess your Therma-Tru door for free.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We inspect the slab, frame, hinges, weatherstripping, threshold, and locking hardware. For Therma-Tru doors specifically, we check corner joints on Classic-Craft models, sweep condition on Fiber-Classic and Smooth-Star doors, and multi-point lock engagement on Pulse systems.
- 2
Written estimate. You get a line-item price in writing before we pick up a tool. No change orders, no surprise add-ons at the end.
- 3
Repair or install. We use genuine Therma-Tru parts for weatherseals and corner seals, and quality equivalent hardware where appropriate. Every repair includes a written guarantee. If a repair fails, the second visit is free.
- 4
Test. We check the swing, the seal, the latch, the deadbolt, and the weatherstripping compression. On Pulse multi-point locks, we cycle the shoot bolts multiple times to confirm full engagement.
- 5
Warranty. Every job is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right. We also walk you through any remaining manufacturer coverage in plain English.
Therma-Tru Products We Service & Install in Orlando
We service and install the Therma-Tru door lines most common in Orlando homes:
- Classic-Craft – premium fiberglass doors with authentic wood-grain texture. Common issues: corner joint separation, finish fading from UV exposure.
- Fiber-Classic – mid-range fiberglass doors found on thousands of Orlando homes. Common issues: slab swelling from humidity, sweep failure, hinge-side binding.
- Smooth-Star – smooth-faced fiberglass doors. Common issues: flattened weatherstripping, latch misalignment from seasonal movement.
- Pulse – Therma-Tru’s line with integrated multi-point locking. Common issues: shoot bolt engagement failures, frozen lock cylinders.
We stock weatherstripping, sweeps, adjustable sills, and multi-point lock components in our Orlando shop for same-day Therma-Tru Windows & Doors in Pine Hills, FL repairs and throughout the area. We also do full-frame replacements and new construction installs when a door has reached the end of its useful life, including hurricane-rated entry door systems that meet Florida Building Code wind-load requirements.
We Also Service These Brands
While this page focuses on Therma-Tru, our Orlando crew installs and services seven other professional-grade window and door lines through our Window Replacement services, including PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux. That breadth matters. We match the product to your home’s exposure, architecture, and budget rather than pushing one brand because it’s the only one we sell.
FAQs – Therma-Tru Windows & Doors Service in Orlando
No, we’re an independent service provider. We are not affiliated with or authorized by Therma-Tru. That independence means we repair what’s actually failing rather than steering toward a replacement to satisfy a dealer program. Our Orlando crew works on Therma-Tru entry and patio doors every week, and we’ve learned their failure modes through years of hands-on work, not a manufacturer training manual.
Yes, for the parts where a factory fit matters most. We use genuine Therma-Tru weatherstripping, corner seals, and adjustable sills because those components are designed specifically for Therma-Tru door profiles and aftermarket versions rarely seat correctly. For hinges, sweeps, and multi-point lock internals, we often install equivalent aftermarket parts that match or exceed the original spec, and we’ll tell you before we make that call. Call (850) 613-9382 for an exact assessment.
That rubbing is almost always caused by the composite core absorbing moisture from Orlando’s summer humidity. The slab expands, and the top corner on the latch side is usually where the clearance is tightest. Sometimes we can fix it by adjusting hinges and shimming the frame. If the slab has absorbed too much moisture permanently, the door is compromised and replacement is the better long-term call. We’ll show you exactly what’s happening before we recommend anything.
We can, if we catch it early. A minor separation at the corner joint can be reseated and sealed. But if the joint has been open for a while and the stile or rail has shifted, the door loses structural integrity and the repair won’t hold under Orlando’s heat and humidity. The honest answer depends on how far the separation has progressed. We’ll assess it free.
It’s common, but it isn’t something you should live with. Smooth-Star slabs expand in Orlando’s heat, and if the door was hung with tight tolerances, the latch stops lining up with the strike plate. We adjust the strike plate and hinges to restore proper clearance. Most of these jobs take under an hour, and the fix holds through seasonal temperature swings. Call (850) 613-9382 and we’ll schedule it.
Yes. We repair Pulse multi-point lock systems regularly. The most common issues are shoot bolts that won’t fully engage and lock cylinders that freeze after years of Orlando humidity. Sometimes it’s a lubrication and adjustment fix; other times the internal gearbox has worn out and needs replacement components. We stock multi-point lock parts to keep turnaround fast.
In almost every case, replacement is the right call. A rotten bottom rail means moisture has penetrated the door’s core, and the structural integrity is already compromised. You can patch it cosmetically, but Orlando’s humidity will continue to work on the weakened slab. We’ll give you a straight answer and a written price either way. Estimates are free call (850) 613-9382.
Therma-Tru service in Orlando typically runs $125 to $450 for common repairs like weatherstripping replacement, hinge adjustment, or multi-point lock repair. Full entry door replacements with a new Therma-Tru slab, frame, and hardware generally start around $1,800 and can go up to $6,000 or more depending on the model, size, glass, and whether you’re adding impact-rated components. We’ll give you a written price before any work begins, and estimates are free. Call (850) 613-9382.
Book Your Therma-Tru Service in Orlando, FL
If your Therma-Tru door is binding, leaking, or won’t latch, call (850) 613-9382. Spencer Odell and the Hale Windows Orlando crew will assess it free, give you a written price, and fix it under the 365-Day Done Right Promise. We serve all of Orlando, from College Park and Winter Park to Therma Tru repair in Apopka and Lake Nona.
Written by Spencer Odell, Owner at Hale Windows Orlando, serving Orlando since 2009.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.