New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Orlando, FL | Hale Windows Orlando
We provide independent Therma-Tru door service and Orlando Window Replacement across the area, from Classic-Craft fiberglass entries to Benchmark steel door systems. What makes our work different here is simple: we know how Orlando’s afternoon storm cycles and humidity actually stress these doors, because we’ve been repairing them since 2009. Call (850) 613-9382 for a written quote before any work starts.
We’re an independent service provider, not a Therma-Tru authorized dealer or manufacturer affiliate. That matters because we repair first and replace only when the door truly needs it. See our full Therma-Tru sales & service capabilities across Central Florida, or keep reading for the Orlando-specific failure patterns we see weekly.
Why Orlando Residents Choose Us for Therma-Tru Service
Therma-Tru builds a genuinely good door. The problem in Orlando isn’t the manufacturing. It’s what our climate does to the installation over time. Spencer Odell, who leads our Orlando crew, learned door systems at Los Angeles Trade-Technical College and has spent nearly twenty years working Central Florida homes, from College Park bungalows to newer Lake Nona builds. He and the team have rebuilt and resealed enough Therma-Tru units to know exactly where they fail here, and why.
When you call, a live person answers. Not a callback queue. We quote a written price before anyone touches your door, and every repair carries a written guarantee. If a repair fails, the second visit is free. That’s the 365-Day Done Right Promise, and it applies to every Therma-Tru job we take in Orlando.
Common Therma-Tru Windows & Doors Problems We Solve in Orlando
- Warped bottom rails on Classic-Craft fiberglass doors. Orlando’s afternoon thunderstorms dump water fast, and if your entry isn’t shielded by a deep overhang, standing water sits on the sill. Fiberglass doesn’t rot, but the bottom rail can warp when moisture cycles repeat daily for months. We replace the integrated sill and reseal the door to stop the cycle.
- Failed compression seals on Smooth-Star systems. Wind-driven rain during hurricane bands pushes water past worn weatherstripping. Smooth-Star doors rely on consistent compression to seal, and once that seal flattens, water rides right into the threshold. We replace the compression seals with fresh Therma-Tru or matched aftermarket weatherstripping and test with a water wand before we leave.
- Cracked fiberglass skins near the kick plate. Orlando homes see heavy foot traffic, and when humidity cycles cause the skin to expand and contract, the area around the kick plate is the first to stress. Small cracks turn into water intrusion points fast. We can skin-patch minor cracks; deeper fractures usually mean the door has reached end of life.
- Corroded multi-point locking mechanisms on Pulse Series doors. Condensation in wall cavities is a year-round issue in Orlando. The Pulse multi-point lock sits inside the door stile, and when that cavity sweats, the lock corrodes. You’ll notice the door doesn’t throw all three points anymore. We replace the lock body with a new unit and reseal the stile to slow future corrosion.
- Rusted bottom panels on Benchmark steel doors. We pulled a Benchmark entry door in College Park where the bottom panel had rusted through behind the weatherstripping. The homeowner thought it was just a stiff hinge. We traced it to a clogged weep hole that had been trapping rain since the 2019 hurricane season, replaced the integrated sill with a new Therma-Tru composite version, and refinished the door to match the original bronze.
Therma-Tru Service in Orlando: What Local Conditions Mean for Your Equipment
Here’s something checkable that shapes this work more than almost anything else. In Orlando, Therma-Tru door sills on north-facing entries of 1980s and 1990s block homes are notorious for holding moisture from sprinkler overspray and afternoon storms. That standing water sits against the sub-sill and accelerates rot in exactly the place you can’t see from inside. We rarely see this failure pattern in nearby Winter Garden or Kissimmee, where different soil grading and irrigation practices keep the entry drier. Why north-facing? In Orlando’s latitude, north entries receive the least direct sun, so they dry the slowest after a storm or sprinkler cycle. If you live in a block home built in that era and your north entry door feels soft at the threshold or the door doesn’t seat flush anymore, the sub-sill is the likely culprit. It’s one of the most common Window Repair - Orlando calls we run all across the city, and it’s a repair most homeowners don’t catch until the door starts binding.
Therma-Tru Models & Products We Service in Orlando
We service the full Therma-Tru residential lineup: Classic-Craft fiberglass entry doors, Smooth-Star fiberglass door systems, Pulse Series entry doors, and Benchmark steel door systems. For structural or warranty-critical parts like sills, multi-point locks, and weatherstripping, we install genuine Therma-Tru components. For cost-sensitive repairs like handlesets or non-structural trim, we use proven aftermarket hardware that matches the original profile. We stock common Therma-Tru sill and seal parts locally for fast turnaround across the Orlando service area, which means most repairs don’t wait on a shipment. If you need a full replacement door, we’ll spec the right Therma-Tru model for your exposure, wind load, and architecture, and quote a written price before any work begins.
Therma-Tru Service Pricing in Orlando
Therma-Tru door repair in Orlando typically runs between $185 and $525 depending on what failed. Weatherstripping and seal replacement usually lands between $185 and $275. Multi-point lock replacement runs $325 to $475 for genuine Therma-Tru hardware. Full sill or sub-sill replacement starts around $500 and goes up from there depending on what we find underneath. Full door replacement with a new Therma-Tru unit typically runs $2,400 to $5,800 installed, depending on model, size, glass options, and whether the frame needs rebuilding. A free estimate includes a written, line-item price so you know the cost before you commit. Call (850) 613-9382 for exact numbers on your door.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Orlando
Termite damage on a Classic-Craft door usually means replacement, not repair. The fiberglass skin hides what’s happening to the wood frame behind it, and by the time you see it, the structural integrity is gone. We’ll pull the casing and inspect before recommending anything, but if the frame crumbles or the door no longer holds its screws, a full replacement is the honest call. Call (850) 613-9382 and we’ll inspect yours and give you a written price either way.
Orlando’s summer humidity causes the wood frame around your Smooth-Star door to swell, which pinches the door slab. It’s not the fiberglass absorbing water. It’s the framing. Properly sealing the rough opening and adjusting the hinges usually solves it, but if the frame has been swelling for years, it may need shimming or partial rebuild. Call (850) 613-9382 for a free inspection, and you’ll have a written fix price before we start.
Check the door’s label. Impact-rated Therma-Tru doors in Florida must carry a Notice of Acceptance or Florida Product Approval marking, usually on the hinge edge or bottom of the slab. If you don’t see any marking and your home is east of I-4 or in a wind-borne debris zone, your door likely isn’t rated for what Orlando’s building code now requires. We can verify the rating during a service visit and quote a compliant replacement if needed.
Clean the weatherstripping twice a year and check the weep holes at the bottom of the door monthly during hurricane season. Orlando’s sun bakes exterior finishes, so a UV-protective finish refresh every two to three years preserves the fiberglass. Also keep the multi-point lock lubricated with a dry lubricant, not oil, because Orlando’s humidity attracts grime that ties up the lock points. Call (850) 613-9382 if you want our techs to handle the maintenance for you.
Condensation inside the door stile corrodes the lock linkage, which is why only one point throws. It’s common on Pulse Series doors in Orlando’s humid wall cavities. The lock body usually needs replacement, and the stile should be resealed afterward to slow future corrosion. That repair costs $325 to $475 with genuine Therma-Tru hardware. Call (850) 613-9382 for a firm quote on yours.
Service Areas Near Orlando
We provide Therma-Tru service throughout Orlando and the surrounding communities: Therma-Tru service in Pine Hills, Therma-Tru service in Apopka, plus Oviedo, Four Corners, and Forest City. If your door is showing any of the failure patterns above, we’ll come take a look.
Book Your Therma-Tru Service in Orlando Today
If your Therma-Tru door is sticking, leaking, or the lock isn’t throwing all its points, call (850) 613-9382. You’ll get a live person, a written price, and a repair that’s backed by our 365-Day Done Right Promise. Free estimates on every job, no exceptions.
Written by Spencer Odell, Owner at Hale Windows Orlando, serving Orlando and Central Florida since 2009.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.