New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Picture & Fixed Windows in Orlando, FL
Picture windows and fixed windows are large glass panels that don’t open. They’re built to frame a view, flood a room with natural light, and stay sealed against Florida heat and humidity year-round. In Orlando, where afternoon thunderstorms roll through from June through September and the summer sun beats down for months at a time, a properly installed fixed window isn’t just a design choice, it’s a barrier between your air conditioning and the outdoors.
At Hale Windows Orlando, we install and service picture and fixed windows using professional-grade glass systems from PGT, CGI, and ES Windows. Every job gets a written price before we start, and every installation is backed by our 365-Day Done Right Promise. If the work isn’t right, we make it right, no argument needed. Call us at (850) 613-9382 to schedule a free estimate, or keep reading to understand exactly what picture and fixed window installation involves here in Orlando.
Picture and fixed windows fall under our broader Window Installation service. If you’re weighing them against operable windows, vents, or full-frame replacements, that page covers the full scope of what we do.
Key Takeaways:
- Picture and fixed windows in Orlando typically cost between $450 and $1,400 installed, depending on glass package, size, and frame material.
- They’re ideal for rooms where ventilation isn’t needed but light, view, and thermal performance matter most.
- Hurricane-impact glass from PGT or CGI is a common upgrade for Orlando homes, especially in areas like Windermere, Dr. Phillips, and Lake Nona where HOA and code requirements vary.
- Hale installs with a written price upfront and a 365-Day Done Right Promise on every job.
- Every technician is Threshold Verified: background-checked, identity-verified, photo-badged, and sent to you by name and photo before arrival.
When You Need Picture & Fixed Windows
Most Orlando homeowners call us for picture and fixed windows in one of a handful of scenarios. Some are replacing an old single-pane fixed window that’s fogging between panes. Others are building an addition or renovating a living room and want a large glass panel that opens up the space visually. Here are the situations we see most often across Orlando, Winter Park, Maitland, and the surrounding communities:
- You have a failed seal in an existing fixed window. Fog or condensation between the panes means the insulated glass unit has lost its seal. In Orlando’s humidity, this shows up fast and doesn’t reverse.
- You’re replacing a large window over a tub, stairwell, or high wall. Fixed windows are a smart choice where an operable sash would be hard to reach or dangerous to leave open.
- You want a floor-to-ceiling glass wall or a picture window facing a lake or golf course. Homeowners in neighborhoods like College Park, Baldwin Park, and Heathrow regularly upgrade to large fixed panes to capture the view.
- Your current fixed window is drafty or radiates heat. Single-pane aluminum frames, common in Orlando homes built before the 1990s, transfer heat directly into the house. A modern low-E fixed unit blocks a significant portion of that solar gain.
- You’re upgrading for hurricane protection. If you live in a wind-borne debris zone, which covers much of Orange County, a picture window with impact-rated glass from PGT or CGI may be required by code.
In Thornton Park and Delaney Park, we see a lot of 1920s and 1930s homes where original wood-framed fixed windows have warped in the humidity. In Avalon Park and Waterford Lakes, it’s more often 1990s builder-grade aluminum units that are failing. Different neighborhoods, same fix: a properly sealed, correctly flashed fixed window installed by someone who knows Orlando’s climate.
Our Picture & Fixed Windows Process
We keep this simple because window replacement shouldn’t feel like a construction project you have to manage. Here’s what happens when you call Hale Windows Orlando:
- You call and a live person answers. At any hour, day or night. We take your details, ask a few questions about the window, and schedule a free estimate at a time that works for you.
- We send you the technician’s name and photo before the visit. This is our Threshold Standard. You’ll know exactly who’s coming to your door, what they look like, and that they’ve been background-checked and identity-verified. No surprises.
- We measure, assess, and write your price. The technician evaluates the opening, the existing frame, the exposure, and the glass needs. Then they give you a written price before any work begins. That number doesn’t change unless you change the scope.
- We order the glass system and schedule installation. Depending on the product, lead times run anywhere from a few days to a few weeks. Impact-rated glass from CGI or PGT tends to take longer than standard low-E fixed units.
- We install, seal, flash, and clean up. The old window comes out, the new one goes in with proper flashing and insulation, and the work area is left clean. You get a written guarantee, and the 365-Day Done Right Promise covers the installation.
One thing we want to be direct about: fixed window installation isn’t a light DIY weekend. A single person can’t safely handle a 60-pound fixed glass panel alone, and an improperly flashed opening will leak during Orlando’s rainy season. Spencer Odell, our owner, has seen too many water-damaged drywall repairs around Orlando that started with a badly installed picture window. If you’re replacing a fixed window, let a trained team do it.
Picture & Fixed Windows Pricing in Orlando
Picture and fixed window replacement in Orlando generally runs $450 to $1,400 per window installed, depending on size, glass type, and frame material. That’s a real range we see across Orange County, not a national average. Smaller fixed units like a 2-foot by 3-foot bathroom window sit at the low end. A large 6-foot picture window with hurricane-impact glass sits at the top, sometimes higher if the opening needs reframing.
Here’s a clearer breakdown of what drives the number:
| Component | Typical Range (Orlando Market) | Notes |
|---|---|---|
| Standard fixed window, vinyl frame, low-E glass | $450 – $800 | Most common choice for bedrooms, bathrooms, and hall windows |
| Large picture window, vinyl frame, low-E glass | $800 – $1,200 | Living rooms, dining rooms, lakefront-facing walls |
| Hurricane-impact fixed window (PGT or CGI) | $900 – $1,400+ | Required in many wind-borne debris zones; also lowers wind-noise and improves security |
| Aluminum-framed fixed window | $550 – $950 | More common in modern-architecture homes; excellent strength-to-weight ratio |
| Custom oversized or architectural fixed glass | $1,200 – $2,500+ | Floor-to-ceiling glass walls, corner configurations, extra-large panes |
What moves a fixed window from the low end to the high end? Mostly four things: glass package, frame material, size, and access. An impact-rated fixed window from PGT will cost more than a standard low-E unit because it’s built to withstand flying debris in a Category 3 storm. An installation on a second story or over an inaccessible area like a stairwell adds labor. An older Orlando home with a rotted wood frame or a non-standard opening size will require more prep work.
Here’s what we can tell you without seeing the window: Hale gives you a written price before any work starts. No estimates that quietly become invoices. No change orders you didn’t approve. The number you get at the estimate is the number on the bill unless we find hidden damage and walk you through the additional cost before touching it.
Call (850) 613-9382 for a free estimate. We’ll send a Threshold Verified technician to measure and price your specific window, and you’ll have the number in writing the same day.
Glass Options for Orlando’s Climate
Orlando’s climate isn’t like most of the country. We get 50-plus inches of rain a year, the humidity runs high nine months out of twelve, and the UV index hits “extreme” on a regular basis from April through September. That changes what belongs in a fixed window.
Low-E glass (a thin coating that blocks heat while letting light through) is the baseline we recommend for every fixed window in Orlando. It cuts solar heat gain meaningfully, which keeps rooms cooler and reduces the strain on your AC. In a picture window that faces west in the afternoon, low-E glass is the difference between a reading nook and a greenhouse.
Impact-rated glass from PGT and CGI is the next tier. These are laminated glass systems built to hold together when struck by flying debris. If your home is in a wind-borne debris zone, which includes significant parts of Orlando and unincorporated Orange County, building code may require it. Even when code doesn’t require it, homeowners on lakes like Conway or Butler chain love impact glass for the added wind protection and the fact that it cuts outside noise substantially.
Argon-filled insulated glass units add another layer of thermal performance between the panes. We use these regularly in fixed windows for Orlando homes where direct sun exposure is unavoidable. The argon fill reduces heat transfer more effectively than air alone, and in a fixed window that never opens, that efficiency never gets compromised by worn weatherstripping.
We also work with ES Windows and ECO Window Systems for homeowners who want European-style aluminum profiles or specific architectural looks. Not every fixed window needs the same glass. We match the product to the job instead of pushing the same brand everywhere.
Fixed Windows vs. Picture Windows: What’s the Difference?
You’ll hear both terms, and they overlap a lot. A fixed window is any window that doesn’t open. It could be large or small, shaped or rectangular. A picture window is a specific kind of fixed window: a large, single pane (or single insulated glass unit) designed primarily to frame a view, like a picture frame around scenery.
Functionally, the installation process is nearly identical. The distinction matters mostly for sizing and glass choices. A small fixed window over a tub needs less structural consideration than a 6-foot picture window spanning a living room wall. Both get the same flashing, sealing, and insulation treatment from our crew.
In Orlando, picture windows face a unique challenge: they’re usually installed on the east or west side of a home to capture a view, which means they also capture direct sunlight. That’s why we pay extra attention to glass selection on picture windows. A poorly glazed picture window in Orlando isn’t just energy-inefficient, it can fade furniture, warp flooring, and make a room physically uncomfortable by mid-afternoon.
Building Code and Permits in Orlando
Window replacement in Orlando requires a permit when the installation involves changing the opening size, replacing the frame, or installing impact-rated products in certain zones. Direct replacements of the same size with like-for-like products sometimes fall under simpler rules, but we pull permits whenever the job calls for them and coordinate with Orange County or the City of Orlando as needed.
Impact requirements matter here. Orange County enforces the Florida Building Code, which designates wind-borne debris regions. If you’re in one of those regions, your fixed window must meet specific impact-resistance standards. We’ll tell you during the estimate whether your project falls into that category. No guesswork and no cutting corners to save a few dollars on a window that’s supposed to protect your home in a storm.
For a deeper look at how Orlando’s climate and building code affect all window choices, read our guide to Window Installation in Orlando.
Energy Efficiency and Your Electric Bill
Orlando homeowners run air conditioning roughly 10 months out of the year. OUC and Duke Energy rates have climbed steadily. Every fixed window on your home is either helping keep cooled air in or leaking it out all day long.
A single-pane fixed window has an R-value around 1. A modern double-pane low-E fixed unit with argon fill sits around 3.5 to 4.5. That sounds like a small number, but thrown across a dozen windows, it means your AC runs less, cycles less often, and works less hard to hold temperature. Most homeowners feel the difference in the room before they see it on the bill, especially in upstairs bedrooms or west-facing living rooms that used to bake after 3 p.m.
Fixed windows have an advantage over operable windows here: no sashes, no tracks, no weatherstripping that wears out and lets air through. A good fixed window properly installed and sealed is the tightest window in your house. The opening where two sashes meet doesn’t exist. There’s nothing to leak.
Why Orlando Homeowners Choose Hale Windows & Doors
We’re not a general contractor. We’re not a big-box installation subcontractor. Hale Windows & Doors has done windows and doors since 2009 as part of the Threshold Group family of home-service brands. That focus means our installers do this specific work week after week, not drywall one week and plumbing the next.
The 365-Day Done Right Promise is the reason many homeowners stay with us. It’s a documented, named guarantee stamped on every job. If the installation isn’t right, we make it right. We don’t argue about whether the caulk line counts or the frame is square enough. If you’re not satisfied, we fix it. That’s the whole promise.
The Threshold Standard is how we protect you before the work starts. Every technician who comes to your home has been background-checked, identity-verified, and photo-badged. Before the visit, we send you their name and photo. You know exactly who’s at the door before you open it. For homeowners who are often alone during the day, for parents with young children, for older homeowners who’ve had bad experiences with strangers at the door, this matters.
Written pricing is non-negotiable for us. You get a written price before any work starts. Every time, on every job. What we quote is what you pay.
And when you call Hale, a live person answers. 24 hours a day, 7 days a week. No voicemail. No callback queue. You get a human being on the line who can schedule your estimate or answer questions.
FAQs – Picture & Fixed Windows
How much does it cost to install a picture window in Orlando?
A picture window installation in Orlando typically costs between $800 and $1,400, while smaller fixed windows run $450 to $800. The exact price depends on the glass package (standard low-E vs. hurricane-impact from PGT or CGI), frame material, window size, and accessibility. Hale gives you a written price before any work begins, and estimates are free. Call (850) 613-9382 to get yours.
Can you replace a picture window with one that opens?
Yes, in most cases a fixed window can be replaced with an operable window like a casement or double-hung, but it usually requires modifying the rough opening, which may trigger a permit. The reverse is also common: homeowners replacing an operable window with a fixed unit in areas like stairwells or over a tub. We’ll assess the opening and tell you exactly what’s involved and what it costs during the free estimate.
Are hurricane-impact picture windows required in Orlando?
It depends on your location within Orange County. Homes in designated wind-borne debris zones must have impact-rated windows if you’re replacing them, which typically means laminated glass products from manufacturers like PGT or CGI. Even outside those zones, many Orlando homeowners choose impact glass for storm protection and reduced outside noise. We’ll check your property against the current code during the estimate.
How long does it take to install a picture window?
Most picture or fixed window replacements take one to three hours to install, assuming the opening is in good condition. If we find rotted framing, water damage, or need to resize the opening, the job extends accordingly. Product lead time is separate: standard fixed windows often arrive within days to two weeks, while custom and impact-rated units can take three to six weeks. A live person answers at (850) 613-9382 if you want a current timeline.
Why is there condensation between the panes of my fixed window?
Condensation between the panes means the insulated glass unit’s seal has failed and moisture has entered the space between the glass layers. It cannot be cleaned or repaired from the outside; the glass unit needs replacement. In Orlando’s humidity, failed seals are common in windows over 15 years old. We can replace the insulated glass unit while keeping or replacing the original frame depending on its condition.
Written by Spencer Odell, Owner at Hale Windows Orlando, serving Orlando.
Ready to get a written price on your picture or fixed window? Call (850) 613-9382 today. A live person answers, we’ll send a Threshold Verified technician with a name and photo before the visit, and you’ll have an exact number in writing before any work starts. From our home to yours, that’s the Hale Windows Orlando way.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.