New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Windows & Doors in Apopka, FL | Hale Windows Orlando
We provide independent Apopka Window Replacement and door service across Apopka, from single-hung rebuilds in 1920s bungalows to impact-rated casement work in Rock Springs Ridge. The one thing that makes our CWS work here different: we understand how Apopka’s clay-rich soil and humid storm season stress these units in ways you won’t see in Orlando or Pine Hills. Call (850) 613-9382 to schedule your free estimate.
Why Apopka Residents Choose Us for CWS Service
CWS builds a solid Florida window. But “solid” doesn’t mean “never fails,” especially in Apopka, where the housing stock ranges from wood-frame bungalows built before air conditioning to block-and-stucco homes from the 2000s. Our technicians have worked on both ends of that spectrum, which means we’ve seen how a CWS 6800 single hung behaves in a settled 1920s jamb and how a CWS 8000 impact casement handles years of afternoon thunderstorm cycles.
Spencer Odell, our owner, learned this trade at Los Angeles Trade-Technical College and has spent nearly two decades applying that education to Central Florida homes. He and the crew have replaced windows on everything from older College Park bungalows to newer builds, and they’re particular about Florida Building Code details. If the numbers and the warranty language don’t back it up, Spencer won’t say it.
We’re an independent CWS service provider, not a manufacturer affiliate or authorized dealer. That independence matters: when a CWS unit needs repair, we recommend the fix that serves the homeowner, not the one that serves a brand relationship. For more on our broader CWS work, see our CWS sales & service page.
Common CWS Windows & Doors Problems We Solve in Apopka
These are the failures we see most often on CWS products in Apopka, tied to local conditions:
- Fogged glass in CWS 6800 insulated units. Seal failure between the panes is the usual culprit, and Apopka’s high humidity plus daily summer downpours accelerates it. Once the desiccant inside the spacer is saturated, you get condensation that won’t wipe off. We replace the insulated glass unit with OEM CWS glass when available, or a proven equivalent when lead times run long.
- Stuck or warped sashes in CWS single hungs. Older wood-frame bungalows near downtown Apopka sit on clay-rich soil that shifts with wet and dry cycles. When the framing moves, the window jamb moves with it, and an aluminum CWS sash that once slid fine starts binding. We re-shim the jamb and replace worn balances to restore smooth operation.
- Seized roller assemblies in CWS 9000 horizontal rollers. Storm-driven grit works its way into the track, chews up the roller bearings, and eventually the door feels like it’s dragging concrete. We clean the track, replace the roller assemblies with quality aftermarket parts when the units are out of warranty, and adjust the glide.
- Misaligned CWS entry doors. Doors that won’t latch or seal tight are common in Apopka subdivisions like Errol Estate and Rock Springs Ridge, where foundation settling shifts the rough opening. We re-shim the frame, adjust the hinges, and reset the weatherstripping so the door closes square and locks without a fight.
- Corroded hardware on CWS impact casements. Repeated exposure to Apopka’s humidity and rain leaves hinge hardware and locking points corroded. We clean, lubricate, or replace hardware and check that the multipoint lock engages fully, which matters when a storm is bearing down.
CWS Service in Apopka: What Local Conditions Mean for Your Equipment
Apopka’s clay-rich soil is the defining local factor for CWS work here, and it’s something you won’t hear about from a generic window company. This soil absorbs water during the wet season and shrinks during the dry months, and that cycle moves foundations. The result: CWS doors and windows in older bungalows near downtown Apopka often need re-shimming every few years just to maintain a clean latch and seal. It’s a service call that’s rarely needed in sandy-soil cities like Altamonte Springs, where the ground drains faster and shifts less.
At a 1920s bungalow on Semoran Boulevard, our tech found a CWS 6800 single hung that wouldn’t stay open because the original wood frame had settled nearly half an inch. We re-shimmed the jamb, replaced the worn balance springs with aftermarket equivalents, and prepped the opening for a future insert replacement once the owner budgets for impact glass. That’s the kind of job that defines CWS service in Apopka: the window was fine, the house had moved around it, and the fix required knowing both.
For our full coverage details, see the Apopka service area page.
CWS Models & Products We Service in Apopka
We work on the CWS product families most common in Apopka homes:
- CWS 6800 Series Single Hung – the workhorse of older Apopka bungalows and mid-century builds.
- CWS 8000 Series Impact Casement – common in newer subdivisions where hurricane protection is code-required.
- CWS 9000 Series Horizontal Roller – popular in lanai openings and Florida rooms across Apopka.
- CWS 6800 Series Fixed/Picture – large glazed openings that suffer seal failure over time.
When it comes to parts, we use OEM CWS components for critical weather seals and impact glass, because those tolerances matter when a storm hits. For out-of-warranty units, we’ll recommend proven aftermarket rollers and balances when they perform as well and cost less. We advise replacement over repair only when a CWS unit has multiple failed seals or frame rot that compromises structural integrity.
CWS Service Pricing in Apopka
Here’s what you can expect to budget for common CWS repairs in Apopka:
- Single CWS window service call and diagnostic: $75 – $150, credited toward the repair if you proceed.
- Insulated glass unit replacement (CWS 6800 fogged glass): $220 – $450 per window, depending on size and glass type.
- Balance or roller assembly replacement: $95 – $210 per unit.
- Door re-shimming and hardware adjustment: $140 – $350.
- Full frame replacement of a CWS window: $800 – $2,400 per opening, depending on size, impact rating, and frame condition.
Every estimate is written and line-itemed before any work starts. The number we write is the number you pay. Call (850) 613-9382 and we’ll walk your property, measure your CWS units, and give you a firm price in writing.
Serving Apopka, FL - Our Local Coverage Area
We’re based in the Apopka area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Windows & Doors in Apopka
The seal on the insulated glass unit has failed, and Apopka’s high humidity and daily thunderstorms push moisture into the airspace until it condenses on the glass. The fix is replacing the insulated glass unit, which we do with OEM CWS glass when available or a proven equivalent. Call (850) 613-9382 for a free estimate on the replacement.
It depends on the frame’s condition and depth. Many 1980s wood or aluminum frames in Apopka don’t have the structural capacity or glazing pocket to hold code-compliant impact glass. In those cases, we recommend either an insert replacement with a new impact-rated CWS frame or a full-frame replacement. We’ll assess the existing frame and tell you honestly which path makes sense for your home.
It’s common in Rock Springs Ridge and other Apopka subdivisions where clay soil moves with moisture. The slab shifts slightly, the door frame follows, and a track that was level is now binding at the midpoint. We re-shim or adjust the frame, clean the track, and replace worn rollers, which typically resolves the sticking. Call (850) 613-9382 for a free Window Repair - Apopka estimate to get it diagnosed.
If the seal is the only issue and the frame is square, saving the sash with a new insulated glass unit makes economic sense at $220 – $450. If that same window also has corroded hardware, frame rot, or the operator is failing, replacement starts looking better. We’ll price both options and give you our honest read on which one fits your budget and the window’s condition.
Yes, we handle CWS garden windows across Apopka. Leaks around the base usually come from failed perimeter sealant or a sagged rough opening, and Apopka’s summer thunderstorms expose it fast. We reseal the joint with the right product, check that the window is still supported properly, and verify drainage paths are clear. Call (850) 613-9382 for a free estimate.
Service Areas Near Apopka
We serve Apopka and the surrounding Central Florida communities, including CWS service in Orlando, CWS service in Pine Hills, Oviedo, Four Corners, and Forest City. The same crew covers all of these areas, so the technician who diagnoses your CWS units in Apopka knows the territory.
Book Your CWS Service in Apopka Today
Call (850) 613-9382 to schedule your free estimate. We’ll send a background-checked, photo-badged technician to your Apopka home, put a written price in your hands before any work begins, and stand behind the job with our 365-Day Done Right Promise.
Written by Spencer Odell, Owner at Hale Windows Orlando, serving Apopka and Central Florida since 2009.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.