New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Apopka, FL | Hale Windows Orlando
We provide independent CGI window and door service across Apopka, and the one thing that makes our work here different is this: we re-shim and adjust CGI frames for Apopka’s clay-soil settling before we ever call a job done. That single step prevents the misaligned sashes, sticking doors, and broken locks we see on homes from Errol Estate to Rock Springs Ridge. If your CGI windows or doors are fighting you, call (850) 613-9382 for a free estimate from a crew that knows Apopka’s ground as well as its glass.
Why Apopka Residents Choose Us for CGI Service
We’ve spent years working on CGI windows and doors in Apopka, and our technicians know these products line by line, from the Estate Collection’s heavy impact glass to the Sentinel Series’ corrosion-resistant hardware. Spencer Odell learned the trade at Los Angeles Trade-Technical College before spending the better part of two decades installing and replacing windows across Central Florida, and he brings that same plain-spoken precision to every CGI service call in Apopka. We’re not a manufacturer-authorized shop, and we’re upfront about that. What we are is independent, which means we offer honest Window Repair in Apopka and fix what’s actually wrong rather than pushing a full replacement when a roller assembly and a re-shim will do the job. We stock genuine CGI parts for warranty-critical components and keep solid aftermarket options on hand for wear items, so your repair doesn’t stall waiting on a shipment. And every job comes with a written price before we touch a tool.
Common CGI Windows & Doors Problems We Solve in Apopka
- Seal failure in insulated glass units. Apopka’s humid summers and pounding afternoon thunderstorms stress the seals on CGI double-pane glass. When the seal goes, you get fogging between the panes and a window that’s no longer doing its energy-efficiency job. We replace the insulated glass unit, not the whole window.
- Hardware corrosion and roller wear on horizontal rollers. High humidity and frequent rain take a toll on CGI roller assemblies and locking hardware. Rollers grind, locks stiffen, and eventually the window won’t slide without a fight. We replace worn rollers and corroded hardware with parts built for Florida weather.
- Sash misalignment on double hung windows. This is the Apopka signature problem. Clay-rich soil settles, foundations shift, and CGI double hung sashes that once glided now bind or refuse to stay up. We re-shim the frame and realign the sash so it operates the way CGI built it to.
- Frame racking and glass stress on impact windows. When a foundation shifts under an improperly installed impact window, the frame can rack and put stress on the glass. That’s a storm-protection liability, not just an operational annoyance. We correct the installation and, if the impact rating is compromised, we’ll tell you straight that replacement is the honest call.
- Sliding glass doors that won’t lock. We recently serviced a 2000s CGI Estate Collection sliding door in Rock Springs Ridge where the homeowner couldn’t lock it after heavy rains. The clay soil had shifted the door frame just enough to misalign the strike plate. We re-shimmed the frame, replaced the worn roller assembly, and the door now glides and locks securely against Apopka’s summer thunderstorms.
CGI Service in Apopka: What Local Conditions Mean for Your Equipment
Apopka sits on clay-rich soil that expands and contracts with moisture, and that ground movement is the quiet culprit behind a lot of CGI window and door trouble here. The clay causes noticeable foundation settling, so our technicians routinely find CGI doors and windows in older neighborhoods like Errol Estate that need re-shimming and adjustment just to close properly. This is a quirk far less common in nearby sandy-soil cities like Altamonte Springs, where the ground drains faster and shifts less. What it means for you as a CGI owner in Apopka: a window that sticks or a door that won’t latch isn’t necessarily a defective product. It’s usually the ground under your slab moving. Our crew checks for settling on every service call, because fixing the symptom without addressing the frame alignment just means you’ll be calling us again in six months. If the numbers and the warranty language don’t back it up, I won’t say it.
CGI Models & Products We Service in Apopka
We service all four major CGI lines: the Estate Collection, Classic Collection, Sentinel Series, and Targa Series. That covers vinyl impact windows, hurricane-rated sliding doors, and the full range of single hung, double hung, and horizontal roller configurations. When a repair calls for warranty-critical components, we use genuine CGI parts. For common wear items like rollers, weatherstripping, and balance springs, we source high-quality aftermarket alternatives that keep the repair cost reasonable without cutting corners. If your CGI product has extensive frame damage or its impact rating is compromised, we’ll recommend full replacement over a patch job, because storm protection is not something to gamble with in Florida. Our work spans CGI sales & service across the board, and we carry the parts Apopka owners need most often.
CGI Service Pricing in Apopka
CGI service in Apopka generally runs $120 to $280 for common repairs like roller replacement, sash realignment, and hardware fixes. Insulated glass unit replacement typically lands between $350 and $700 per pane, depending on size and whether it’s impact-rated. Our Window Replacement in Apopka for CGI impact products runs $900 to $2,400 per opening installed, with the final number driven by model line, glass package, and how much frame work your settling foundation requires. Every estimate includes a written line-item price before any work starts, so there’s no surprise on the invoice. Call (850) 613-9382 for an exact quote on your CGI windows or doors. Estimates are free.
Serving Apopka, FL - Our Local Coverage Area
We’re based in the Apopka area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Apopka
Clay soil expands when wet and contracts when dry, which causes the foundation under your Apopka home to shift slightly over time. That movement racks window and door frames just enough to misalign sashes, bind rollers, and throw strike plates off. We check frame square and re-shim on every CGI service call. Call (850) 613-9382 to have us look at yours.
Yes, if the frame is square and the impact rating is intact, we replace just the insulated glass unit. If the frame has racked from soil settling or the impact seal is compromised, replacement is the honest recommendation. Either way, you’ll get a written price before work begins.
The CGI Sentinel Series is the strongest fit for older wood-framed openings. Its reinforced frame handles the heavier structural loads that come with retrofitting impact glass into a historic bungalow. We’ll confirm measurements and opening condition during the estimate. Call (850) 613-9382 to schedule yours.
Condensation between the panes means the insulated glass seal has failed. Apopka’s heat, humidity, and rapid pressure swings from afternoon storms accelerate seal breakdown. The fix is replacing the insulated glass unit, not the whole window. Call (850) 613-9382 for a free estimate on the replacement.
We do, and Errol Estate is one of the neighborhoods where we see the most clay-soil settling. Wood-framed openings from that era shift with the foundation, so we pay extra attention to shimming and alignment to keep your CGI windows operating properly for years. Apopka service area coverage includes all of Errol Estate.
Service Areas Near Apopka
We serve Apopka and the surrounding communities, including CGI service in Orlando, CGI service in Pine Hills, Oviedo, Four Corners, and Forest City. If you’re within a short drive of Apopka, call (850) 613-9382 and we’ll get you on the schedule.
Book Your CGI Service in Apopka Today
Call (850) 613-9382 to schedule your free CGI service estimate in Apopka. We’ll send a background-checked, photo-badged technician you’ll know by name before they arrive. Written price first, 365-Day Done Right Promise on every job.
Written by Spencer Odell, Owner at Hale Windows Orlando, serving Apopka and Central Florida since 2009.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.