New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Awning & Hopper Windows in Orlando, FL
Awning windows hinge at the top and open outward from the bottom, while hopper windows hinge at the bottom and tilt inward from the top. Both are compact, functional windows that solve specific problems: ventilation in tight spaces, airflow during Florida rain, and secure openings in hard-to-reach spots like basements, bathrooms, and above kitchen sinks. Hale Windows Orlando installs and services both styles across Orlando, and you can reach us at (850) 613-9382 any time to talk through what your home needs. If you’re exploring full Window Installation in Orlando, this page covers the awning and hopper side of that work in detail.
We’ve been doing this since 2009, and we work with professional-grade product lines including CGI, CWS, and ES Windows. Every job gets a written price before any work begins, and every installation is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right. No argument, no runaround.
Key Takeaways
- Awning windows open outward from the bottom; hopper windows open inward from the top.
- Both styles perform well in Orlando’s rainy season because they can stay open during light rain without letting water in.
- Expect to pay anywhere from $350 to $900 per window installed, depending on size, brand, and frame material.
- Hale Windows Orlando provides a written price before work starts and backs every job with a 365-Day Done Right Promise.
- Call (850) 613-9382 for a free estimate. A live person answers, day or night.
When You Need Awning & Hopper Windows
Orlando homes have specific ventilation and moisture challenges: high humidity, afternoon thunderstorms, and rooms that get stuffy without good airflow. Awning and hopper windows address these in ways double-hung or sliding windows can’t always match. Here’s when they make sense:
- Bathroom ventilation. Hopper windows are common in older Orlando homes for bathroom use because they tilt inward at the top, letting warm, humid air escape while maintaining privacy. If your bathroom window is fogged, rotted, or painted shut, a replacement hopper window restores airflow and cuts down on mildew.
- Above kitchen sinks and counters. Awning windows work well over sinks and counters because they’re easy to reach and crank open with one hand. In neighborhoods like College Park and Delaney Park, we regularly replace kitchen awning windows whose crank mechanisms have seized from years of Florida humidity.
- Rain-safe ventilation. Because awning windows open outward and create a small roof-like shield, they can stay open during Orlando’s afternoon downpours without letting water onto the sill or floor. That’s a real advantage for screened porches, laundry rooms, and covered patios.
- Basement and ground-level openings. Hopper windows are the standard choice for basement egress and utility rooms. They open inward, so they don’t interfere with walkways, landscaping, or window wells.
- Mid-century and ranch-style Orlando homes. Many homes built in the 1950s through 1970s in areas like Audubon Park and Conway originally came with awning or jalousie windows. Replacing them with modern awning windows preserves the architectural character while adding impact-rated options and much better energy performance.
- Hard-to-reach or small openings. Closets, stairwells, and powder rooms often have small, odd-sized window openings. Awning and hopper windows are available in compact sizes and can be custom-ordered through our product lines to fit openings that stock windows won’t cover.
Our Awning & Hopper Windows Process
We keep this straightforward. You’ll know the price before we touch the window, and you’ll know exactly who is coming to your home before they arrive. Here’s how it works:
- Call or book a visit. Call (850) 613-9382. A live person answers, 24 hours a day, 7 days a week. No voicemail, no callback queue. We’ll schedule a time that works for you.
- We measure and assess. We inspect the existing window, the frame condition, the rough opening, and the wall structure. For Orlando homes, we also check for moisture intrusion, wood rot, and whether the current window meets any HOA or coastal building requirements.
- You get a written price. Before any work is scheduled, you receive a written quote. This is our standard practice on every job, including awning and hopper window installations. The price is the price.
- You meet your technician before the visit. Under our Threshold Standard, every technician is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the truck pulls up. You’ll know who is at the door before you open it.
- Installation day. We remove the old window, inspect the rough opening, repair or replace any damaged framing as needed, install and seal the new window, and clean up the work area. Most awning and hopper installations are completed in one day.
- 365-Day Done Right Promise. If anything is not right within a year, we come back and make it right. That’s a named, documented guarantee on every job we do, not a vague assurance.
Awning & Hopper Windows Pricing in Orlando
You should know what this costs before you call. Here’s what we see across Orlando for awning and hopper window installations:
| Window Type | Typical Price (Installed) | Notes |
|---|---|---|
| Vinyl hopper window (basement/utility) | $300 – $475 | Small sizes, standard glass |
| Vinyl awning window (kitchen/bath) | $375 – $550 | Standard size, single unit |
| Aluminum awning window (impact-rated) | $550 – $825 | Meets Florida coastal building codes |
| Premium vinyl or aluminum awning with low-E glass | $475 – $700 | Low-E coating blocks heat while letting light through |
| Custom-sized or oversized awning window | $650 – $950+ | Depends on dimensions and frame material |
Several factors move the price. Impact-rated glass costs more than standard glass but is often required in newer Orlando construction and for homes in wind-borne debris zones. Low-E glass, which has a thin coating that blocks heat while letting visible light through, adds $40 to $80 per window and is worth it in Orlando’s climate. Frame material matters too: vinyl is the most affordable, aluminum is mid-range and common for impact windows, and wood-clad options run higher.
Replacing a hopper or awning window that’s already in a sound rough opening costs less than a full tear-out with frame repair. If we find rotted wood or termite damage when we pull the old window, that adds to the scope and the price. You’ll see that on the written quote before we proceed, not as a surprise after the fact.
We don’t give vague “call for pricing” runarounds. We give you a written price before any work starts. Estimates are free. Call (850) 613-9382 and we’ll schedule the measurement visit.
Why Awning & Hopper Windows Work Well in Orlando’s Climate
Orlando’s climate isn’t like most of the country. We get 50-plus inches of rain a year, months of 90-degree humidity, and the occasional tropical storm. Awning and hopper windows handle these conditions better than many other styles if they’re installed correctly and sealed properly.
The outward-opening design of an awning window acts like a small awning over the opening. During a passing rain shower, you can leave it open and keep air moving through the house without water pooling on the windowsill. That’s a specific benefit in Orlando, where thunderstorms roll through almost every summer afternoon.
Hopper windows, which open inward from the top, are good for ventilation at ground level and in basements. In Florida, basements are less common than up north, but many Orlando homes have enclosed utility rooms, garages, or crawl spaces where a hopper window provides airflow without compromising security. The inward-opening design means the window can’t be pushed open from outside when it’s locked.
We also recommend impact-rated awning windows for homes in Orlando neighborhoods where wind-borne debris is a concern. Our product lines include CGI, CWS, and ES Windows, all of which offer impact-rated options that meet Florida building codes. These windows use laminated glass and reinforced frames to withstand hurricane-force winds and flying debris. If you’re in a home built before 2002, when Florida’s statewide building code went into effect, impact-rated replacement windows are a meaningful upgrade.
Hardware and Parts We See Fail Most Often in Orlando
Awning and hopper windows are mechanically simple, which means there are fewer things to go wrong than a sliding window or double-hung. But Orlando’s humidity and heat take a toll on certain components. Here’s what we replace most often:
Crank mechanisms and operators
Awning windows use a crank or torque bar to open and close. After years of exposure to humidity, the gears inside the operator can seize, strip, or break. When that happens, the window stuck open is a security concern and a water intrusion risk. We replace operators with hardware matched to the window brand, whether that’s ES Windows, CWS, or another line we carry.
Hinges and pivot arms
The hinges on awning windows carry the full weight of the sash every time it opens. Over time, especially on larger windows, the hinge pins wear and the window starts to sag or bind. In coastal-adjacent areas of Orlando where salt air is present, hinge corrosion accelerates. Replacement hinges are usually a same-day repair.
Weatherstripping and seals
Florida sun degrades vinyl and rubber weatherstripping faster than in cooler climates. When the seal around an awning or hopper window fails, you’ll feel drafts, see condensation between the panes, or notice water staining on the interior. We replace worn weatherstripping and re-seal the window perimeter to stop air and water intrusion.
Glass and glazing
Cracked glass, fogged double-pane units, and failed seals are common in Orlando homes. We can replace just the insulated glass unit in many awning and hopper windows without replacing the whole window, depending on the brand and age. This is often the most cost-effective repair if the frame is still in good shape.
If your awning or hopper window won’t close properly, call us before forcing it. A window that’s stuck half-open is a security risk and an open door for Orlando’s afternoon rain. We can usually diagnose the issue over the phone and get someone out quickly.
How Much Does It Cost to Repair vs. Replace an Awning or Hopper Window in Orlando?
Repairs are almost always cheaper, but they’re not always the right call. Here’s the honest breakdown:
- Operator or crank replacement: $85 to $185, including the part and labor.
- Hinge or pivot arm replacement: $110 to $220 per window.
- Weatherstripping and re-sealing: $90 to $175.
- Insulated glass unit replacement: $200 to $400, depending on size and whether it’s impact-rated or standard glass.
- Full window replacement: $350 to $900+ installed, as detailed in the pricing table above.
The decision to repair or replace comes down to three questions: How old is the window? Is the frame still solid? Is the current window energy-efficient or original to a house built decades ago? In Orlando, if your awning or hopper window is more than 20 years old, single-pane, or has a frame that’s showing rot or rust, replacement is usually the smarter long-term move. If the frame is solid and the glass is good, a repair is often all you need.
Either way, every repair carries a written guarantee. If the repair fails, the second visit is free. That’s our policy, not a promotional line.
FAQs – Awning & Hopper Windows
How much does it cost to install an awning window in Orlando?
An awning window in Orlando typically costs between $375 and $825 installed, depending on size, frame material, and whether you choose impact-rated glass. Vinyl awning windows in standard sizes sit at the lower end of that range, while impact-rated aluminum windows with low-E glass run higher. Call (850) 613-9382 for a free written estimate, and we’ll give you an exact number before any work begins.
Can you fix my awning window the same day?
In most cases, yes. Common repairs like operator replacements, hinge fixes, and weatherstripping are usually done in a single visit, and we stock parts for the brands we carry, including ES Windows and CWS. If we need to order a specific part, we’ll tell you that upfront and give you a clear timeline. Call (850) 613-9382 and describe the problem; we’ll let you know what to expect.
Are awning windows good for Florida hurricanes?
Awning windows can be excellent for Florida hurricanes if you choose impact-rated models. Impact-rated awning windows use laminated glass and reinforced frames that hold up against wind-borne debris and meet Florida building code requirements. We install impact-rated awning windows from CGI, CWS, and ES Windows. If you’re replacing windows in an Orlando home built before 2002, we recommend impact-rated glass for any opening that faces the prevailing wind.
What’s the difference between an awning window and a hopper window?
An awning window hinges at the top and opens outward from the bottom, like a small awning. A hopper window hinges at the bottom and tilts inward from the top. Awning windows are common above sinks and counters; hopper windows are typical in basements, utility rooms, and other low or ground-level openings. Both are good choices for ventilation in tight spaces, and we install both styles across Orlando.
Is it cheaper to repair or replace my awning window?
Repair is cheaper if the problem is isolated to a component like a crank, hinge, or seal. Those repairs run $85 to $220 in Orlando. Replacement is the better value when the window is more than 20 years old, single-pane, or has a failing frame. We’ll give you an honest recommendation either way, and you’ll get a written price before you commit. Call (850) 613-9382 to schedule a free assessment.
Do you guys come to my neighborhood?
Yes. We install and repair awning and hopper windows throughout Orlando, including College Park, Audubon Park, Conway, Delaney Park, Baldwin Park, Thornton Park, Winter Park, and Dr. Phillips. If you’re within the greater Orlando area, we’ll come to you.
Who Is Coming to Your Home
We know that opening your door to a stranger is a real concern, especially if you’re home alone, have young children, or have had a bad experience with a contractor before. That’s why we built the Threshold Standard into how we operate.
Every technician who comes to your Orlando home is background-checked, identity-verified, uniformed, and photo-badged. Before the visit, you receive the technician’s name and photo. You’ll know exactly who is at the door before you open it. No surprises, no unmarked trucks, no “some guy” showing up.
This isn’t something we do for marketing. It’s something we do because our customers in Orlando have told us, repeatedly, that it matters. We serve a lot of older homeowners and a lot of families with young kids. The person who shows up at your door should be someone you can identify instantly.
Why Choose Hale Windows Orlando for Awning & Hopper Windows
We’re a windows-and-doors specialist, not a general contractor who dabbles in windows. That focus shows in the details. We install and service windows and doors from eight professional-grade lines, including CGI, CWS, ES Windows, ECO Window Systems, PGT, Mr-Glass, Therma-Tru, and ViewLux. For awning and hopper windows specifically, we work most often with CGI, CWS, and ES Windows because their impact-rated and coastal product options fit Orlando’s climate and code requirements best.
Founded in 2009, Hale Windows Orlando is independently owned and operated as part of the Threshold Group family of home-service brands. We’ve spent 15-plus years serving Orlando homeowners, and our process has been refined from thousands of window installations and repairs across the area.
Every job gets a written price before work starts. Every repair gets a written guarantee; if it fails, the second visit is free. Every installation is covered by the 365-Day Done Right Promise. And when you call, a live person answers. Always.
Get a Free Estimate for Awning or Hopper Windows in Orlando
If you’re considering awning or hopper windows for your Orlando home, start with a conversation. Call (850) 613-9382 and tell us what you’re working with. We’ll ask a few questions, give you honest guidance, and schedule a measurement visit at a time that works for you.
You’ll get a written price before any work begins. You’ll know who’s coming to your home before they arrive. And you’ll have a year of coverage under our 365-Day Done Right Promise to make sure the work is done right. That’s how we do windows in Orlando.
Call (850) 613-9382 today for your free estimate.
Written by Spencer Odell, Owner at Hale Windows Orlando, serving Orlando.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.