New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Impact Garage Doors: The Orlando Owner’s Guide
We stock and install ECO Window Systems-compatible impact garage doors throughout Orlando, with most complete door replacements running $2,800 to $6,500 installed depending on size, series, and track configuration. We keep the most common ECO Window Systems rollers, hinges, bottom seals, and struts on our trucks, so if the failure is a hardware component rather than the door itself, we can usually have it sorted the same visit. Most homeowners discover the problem the hard way: the door starts shuddering on the track, binds halfway up, or you notice a crack radiating from a hinge plate after a storm that got a little too close.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds impact-rated garage doors in a few distinct series, and the part you need depends on which one is sitting in your Orlando garage. Their heavier hurricane-rated models use a wider profile rail and thicker-gauge track than their standard wind-load doors, which means a hinge or roller from a lighter series will not seat correctly even if it looks close. Before you order anything, take a photo of the metal label on the inside edge of the door panel and measure the exact width of the vertical rails. We have seen homeowners order the right brand, wrong series, and end up with a box of parts that fit nothing.
On the OEM versus aftermarket question: ECO Window Systems OEM hardware is well made, but for rollers and hinges specifically, there are quality aftermarket options that match the spec at 30 to 40 percent less. We honestly recommend OEM for anything structural, namely struts and heavy-duty end hinges, because those carry the wind-load rating. For wear items like rollers and bottom seals, a quality aftermarket equivalent is nearly always fine and we will tell you which one we would put on our own door.
Signs Your ECO Window Systems Impact Garage Door Is Failing
- Shuddering or jerking on the way up. This usually means a roller has flat-spotted or the bearing inside it is seizing up. On impact-rated doors, damaged rollers put uneven load on hinge plates, which accelerates cracking.
- Gap under the door at one corner. A sagging or blown bottom seal is common in Orlando because heat and humidity harden the rubber far faster than the manufacturer’s general lifespan estimate. If you can see daylight, your seal is done.
- Visible crack at a hinge plate or strut connection. This is the one we tell people not to ignore. On an impact door, that crack is a load-path failure. The next wind event is not the time to find out the door has lost its rating.
- Door binds or stops mid-travel. Bent track from storm debris or a failed cable tension spring can cause this. On high-tension systems, this is where we draw the line on DIY.
- Loud pop during a storm or sudden looseness afterward. A popped strut or sheared fastener. Check the bolts along each horizontal reinforcement bar. If anything is loose, the door’s impact rating is compromised.
Replacement Cost & What’s Included
In Orlando, you should expect to pay between $2,800 and $6,500 for a complete ECO Window Systems-compatible impact garage door installed, with the price driven mainly by door width, whether you need a single or double door, and which series matches your existing hardware. Hardware-only repairs cost far less: replacing rollers and hinges typically runs $180 to $420, a new bottom seal hangs around $120 to $220, and a full strut replacement on a single door lands between $350 and $700. Every quote we give includes the part and labor separately on paper, so you know exactly what you are paying for before any work starts. We back every repair with a written guarantee, and if that repair fails, the second visit is free.
DIY or Call Us?
There are a couple of checks you can make safely: measure the rail width, photograph the door label, and look for visible cracks at hinge points. You can also replace a bottom seal if you are comfortable working with a utility knife and the door stays locked in the open position the whole time. But anything involving torsion springs, cables under tension, or a door that has come off its track is genuinely dangerous. Those springs hold enough stored energy to send a winding bar through sheetrock. We have been called out after DIY attempts in Orlando too many times to pretend otherwise. If the failure is anything beyond a seal or a visual inspection, call us at (850) 613-9382 and we will put eyes on it before you risk your hands or worse.
FAQs
In Orlando’s heat and humidity, a well-maintained ECO Window Systems impact door should last 15 to 20 years, but hardware components like rollers and seals typically need replacement every 5 to 7 years. Salt air near coastal corners of Central Florida accelerates that. Call (850) 613-9382 and we will tell you honestly whether you are looking at a hardware refresh or a full door replacement, with a written quote either way.
Most failures we see are hardware-related, meaning rollers, hinges, seals, or struts, and those are repairable without replacing the door. Structural panel cracks, especially near the hinge points, usually push you toward replacement because the wind-load rating cannot be restored with a patch. We never recommend replacement unless the numbers say it is necessary, and the quote will show you exactly why.
A single-door hardware repair is usually done the same visit. A full door replacement in Orlando typically takes 4 to 6 hours on site, with disposal of the old door included. We will confirm the timeline in writing before we schedule.
Yes, we keep ECO Window Systems-compatible rollers, hinges, bottom seals, and struts stocked on our trucks for the most common series. For less common track configurations, we can order and have the part in hand within a few business days. We also service parts for PGT, CGI, and CWS doors, so if you have a mixed-brand garage, we are likely to have what you need.
If your ECO Window Systems impact garage door is binding, cracked, or simply not closing the way it should in Orlando’s storm season, call (850) 613-9382 for a free estimate. We put the price in writing before any work starts, and every repair carries a written guarantee. Spencer Odell and the crew at Hale Windows Orlando have been matching the right parts to the right doors across Central Florida long enough to know that if the numbers and the warranty language don’t back it up, we won’t say it.
Written by Spencer Odell, Owner, Hale Windows Orlando, serving Orlando and nearby areas.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.