CGI Front Door Replacement Nationwide

CGI Front Door Replacement in Orlando: What to Know First

CGI front door replacement in Orlando typically runs $1,800 to $4,600 depending on the model, glass package, and whether the frame needs rework. We’re an independent CGI service provider, not a manufacturer affiliate, and most front door replacements take us one full day from removal to a finished, weather-sealed entry. If your CGI door is failing, you’ll get a written price before we touch anything. This page is for Orlando homeowners who already own a CGI product and need straight answers about replacing the front door. Call (850) 613-9382 and Spencer or one of our senior techs will walk you through what’s actually happening with your door.

Call (850) 613-9382

Key Takeaways

• CGI front door replacement in Orlando costs $1,800 to $4,600 on average, fully installed.
• Most CGI front doors in Orlando fail at the threshold, the hinge-side weatherstrip, or the glass seal, not the slab itself.
• We sell and install CGI’s current-model doors, and we also work with PGT, CWS, ES Windows, and ECO Window Systems if a different product fits better.
• Every CGI replacement from Hale Windows Orlando carries a written price up front and our 365-Day Done Right Promise.

How CGI Products Fail – and How We Fix Them

CGI builds a solid door, but Orlando’s climate finds the weak points. Here are the failure modes we see most on front doors in this market, and what we do about them.

• Hinge-side gasket compression on the Estate Collection. Orlando’s humidity cycle, wet summer, dry winter, repeated thousands of times, compresses the wool-pile and rubber gaskets along the hinge stile. Homeowners notice light leaking in around the latch side or a whistle during afternoon thunderstorms. The fix is usually a full gasket replacement and hinge re-shimming, not a new slab. But when the slab is dented or the corner joinery has opened up, replacement is the honest answer.
• Sill pan corrosion on older CGI 950 Series doors. The 950 Series predates CGI’s current sill design, and in Central Florida we find sill pans with pinhole corrosion where sprinkler overspray hit them for a decade. Water wicks up into the door bottom and rots the internal blocking. Once that starts, patching is pointless. We pull the old door, inspect the rough opening for rot, and set the new door on a fresh, properly sloped pan.
• Glass seal failure on impact-rated insulated units. CGI’s impact glass packages use a laminated inner layer and an insulated air space. When the seal between those fails, you get fogging between the panes that won’t wipe off. On a front door, that’s a security and curb-appeal problem at the same time. On some models the glass can be replaced as a unit. On others, the frame profile won’t accept a new glass pack cleanly, and a full door replacement is cheaper than fighting it.
• Sticking or sagging on wider double-door configurations. CGI double front doors, think the 8500 Series, are heavy. Over time, the top hinge screws pull, the door sags a quarter inch, and the active leaf drags on the sill. Homeowners try to adjust it themselves and strip the hinge threads. We see this constantly in neighborhoods like Baldwin Park and Thornton Park where double entries are common. When the hinge bosses are stripped, we replace the door and upgrade the hinge reinforcement in the rough opening at the same time.
• Faded or chalky finish on dark-painted CGI doors. Orlando sun is unkind to dark finishes. A black or deep bronze CGI door facing west will chalk and fade within five to seven years. Repainting an impact-rated door is possible but rarely matches the factory finish, and the prep work costs more than people expect. If the door is otherwise sound, we’ll tell you repainting is an option. If the slab is showing age in multiple ways, replacement with a current-model finish makes more sense.

Our CGI Front Door Replacement Process

1. 1
   Call and talk to a person. You reach a live human at (850) 613-9382. We ask what model you have, what’s failing, and whether you can see a serial number or sticker on the hinge edge. That tells us a lot before we even drive out.
2. 2
   Site visit and measurements. A named, photo-badged tech comes to your home. You’ll know who’s coming before they knock. We measure the rough opening, check the sill, and look at the existing CGI door’s condition.
3. 3
   Written price, no surprises. We hand you a written quote that breaks out the door, hardware, any frame or sill work, and labor. That’s the price. It doesn’t change once work starts.
4. 4
   Parts decision: OEM vs. quality aftermarket. On a CGI door, we use OEM CGI components whenever the job is warranty-sensitive or the door is a current model. For older discontinued series, we’ll match with aftermarket parts that meet or beat the original spec, and we’ll tell you which path we’re taking and why before we order anything.
5. 5
   Installation day. We remove the old door, repair any rough-opening damage, set the new door with proper flashing and sealing, and hang it so it closes square and true. Weatherstrip, threshold, and hardware all get checked.
6. 6
   Test, walkthrough, and the 365-Day Done Right Promise. We operate the door with you, check the seal, and walk you through the warranty. If it’s not done right, we make it right. No argument needed. That promise is in writing on your job paperwork.

What CGI Front Door Replacement Costs in Orlando

Expect these Orlando-market ranges for common CGI front door replacement scenarios:

• Single slab replacement, standard glass, painted finish: $1,800 – $2,500 installed.
• Decorative glass or impact-rated glass upgrade: $2,200 – $3,400 installed.
• Full frame-and-door replacement with sill pan rework: $2,600 – $4,600 installed depending on rough-opening condition and finish level.

What moves the price? Glass package is the biggest lever. A laminated impact unit costs more than standard insulated glass, and it’s worth every dollar in Orlando. Frame condition matters too. A rough opening with rot or an out-of-square jamb adds an hour or two of carpentry. The finish, hardware grade, and whether we’re matching an existing double-door elevation all factor in. Call (850) 613-9382 for a written quote on your specific door. Estimates are free, and the number we hand you is the number you’ll pay.

Why Orlando Homeowners Call Hale Windows Orlando for CGI Work

We’ve been at this since 2009, and Spencer Odell, our owner, learned the trade at Los Angeles Trade-Technical College before spending nearly two decades working Central Florida homes from College Park bungalows to Lake Nona new builds. He’s particular about Florida Building Code details, because a failed inspection costs you time and money, and he’d rather get it right the first time.

Every technician who comes to your door is background-checked, identity-verified, photo-badged, and pre-announced by name and photo. That’s our Threshold Standard, and it exists for one reason: you should know exactly who’s at the door before you open it. We put the price in writing before work starts. We back every job with the 365-Day Done Right Promise. And we don’t push one brand. We stock and install CGI, PGT, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, so when we recommend a CGI door, it’s because it’s the right product for your opening, not because it’s the only thing on our truck.

FAQs

Get Your Written CGI Front Door Replacement Quote

If you own a CGI front door in Orlando and it’s fogging, sticking, sagging, or leaking, call (850) 613-9382. You’ll talk to a live person, schedule a visit with a technician you can identify before they arrive, and get a written price before any work begins. No pressure, no surprises, and the 365-Day Done Right Promise on every job.

Written by Spencer Odell, Owner, Hale Windows Orlando at Hale Windows Orlando, serving Orlando and nearby areas.