New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Orlando pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Orlando Homeowners Choose Mr-Glass Windows & Doors
We provide independent Mr Glass in Orlando window and door repair, service, and replacement across Orlando, FL, covering every residential line from 7200 Series single hungs to 8010 Series impact-rated units. What sets our Mr-Glass work apart is that we diagnose from real field experience across hundreds of Orlando homes, not catalog specs, and we write the price down before any tool comes off the truck. We’re not a Mr-Glass authorized dealer or affiliate. We’re an independent Orlando window and door company that has worked on enough Mr-Glass product to know exactly how it behaves in Florida’s humidity, hurricane winds, and afternoon lightning storms. Spencer Odell leads our crew, and he’ll tell you straight what’s fixable, what’s past saving, and what it costs before you commit. Call (850) 613-9382 and we’ll come look at your windows.
Why Trust Hale Windows Orlando for Your Mr-Glass Windows & Doors?
Mr-Glass builds a solid window, but Orlando’s climate works against every window eventually. We’ve pulled apart enough Mr-Glass units to know which parts fail first, which failures repeat, and which repairs actually hold up through a hurricane season. Our techs know the 7200 Series vinyl single hung, the 7300 horizontal roller, the 7600 casement, and the 8010 impact single hung by feel. When we open a Mr-Glass that’s sticking or sagging, we know whether we’re looking at a roller corrosion issue, a warped sash from condensation cycling, or a track that’s been eaten by salt air and time.
Spencer Odell grew up in the San Fernando Valley and learned the trade at Los Angeles Trade-Technical College before spending nearly two decades installing and replacing windows across Central Florida. He’s put Mr-Glass product in bungalows near College Park and newer builds past Lake Nona. If you got a Mr-Glass casement that grinds when you crank it or an impact window with hairline cracks after a storm, Spencer’s the type who wants to see it in person before he tells you what it needs. As he puts it: “If the numbers and the warranty language don’t back it up, I won’t say it.”
Every repair is covered by our written guarantee. If a repair fails, your second visit is free. That’s how we’ve operated since 2009, independently owned and operated as part of the Threshold Group.
Common Mr-Glass Windows & Doors Problems We Fix in Orlando
- Corroded rollers on 7300 Series horizontal sliders. The factory steel rollers Mr-Glass uses in the 7300 Series do not like Orlando’s humidity. We see them seize into the aluminum track, which makes the sash grind or stick halfway open. We replace them with stainless rollers and rebuild the track rather than replacing the whole window. This is the single most common Mr-Glass repair we do in Orlando.
- Stripped gear teeth in 7600 Series casement operators. The crank-out casement operator uses a small gear set that can strip after years of tropical wind load, salt air exposure, and homeowners cranking against a sash that’s dragging. We rebuild the operator with fresh gearing and check the hinge hardware at the same time so the repair doesn’t fail six months later.
- Warped or dry-rotted vinyl sashes on 7200 Series single hungs. Florida’s condensation cycles are brutal on vinyl. When water sits in the sash track and the sun hits it, the vinyl can bow or crack. A bowed sash beyond 1/8 inch is not worth patching. We replace the sash and reseal the frame so the window closes tight again.
- Meeting rail leaks on impact-rated horizontal rollers. After Orlando’s afternoon storms, we get calls about water coming through where the two sashes meet on Mr-Glass impact sliders. Blown-in debris can damage the weatherstripping or the interlock at the meeting rail. We pull the sashes, inspect the interlock, replace the weatherstripping, and reseal before the next storm rolls in.
- Hairline cracks radiating from weep holes on impact frames. We’ve seen Mr-Glass impact frames develop small cracks around the weep holes even without a direct debris hit. That’s often a sign of stress from the frame expanding and contracting through Orlando’s heat-and-rain cycles. If the cracks are cosmetic and don’t compromise the structural seal, we document them and monitor. If they are deeper or spreading, we recommend a frame or sash replacement because an impact window with a cracked frame will not hold rating when it matters.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For anything that affects weather sealing or the impact rating, we start with OEM Mr-Glass hardware. That includes interlocks, weatherstripping, and impact-rated glass packs. For trim pieces, rollers, and locks, we often spec Type II anodized aftermarket parts. Orlando’s humidity eats raw aluminum, and the Type II anodized finish holds up better than what some original Mr-Glass hardware carries. If you have an impact-rated frame with spider cracks or a sash bowed beyond 1/8 inch, we’ll tell you straight: patching those leaves you exposed next storm. In that case, we quote a full sash or frame replacement. We stock common Mr-Glass parts locally so most repairs don’t wait on a freight truck. Call (850) 613-9382 and we can tell you whether your issue is a parts-on-the-truck fix or something that needs a custom order.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. Our tech inspects your Mr-Glass unit, identifies the failure mode, and checks surrounding hardware so we don’t fix one thing and leave another failing. We’ll show you what we found before we quote anything.
- 2
Written quote. You get a line-item price before work begins. No verbal ballpark that changes later. You know exactly what parts, what labor, and what it costs.
- 3
Repair or replacement. We use OEM Mr-Glass hardware where it matters, Type II anodized aftermarket where it performs better, and we only replace a sash or frame when patching would compromise the window’s weather seal or impact rating.
- 4
Testing. We operate the window repeatedly, check the seal, check the drainage, and verify the closing force. If it’s an impact window, we check the frame for any stress signs before we wrap up.
- 5
Written guarantee. Every repair carries our written guarantee. If it fails, your second visit is free. That guarantee is on paper, not just said over a handshake.
Mr-Glass Products We Service & Install in Orlando
We service and install the full residential Mr-Glass line, including the 7200 Series Single Hung, the 7300 Series Horizontal Rolling Window, the 7600 Series Casement Window, and the 8010 Series Impact-Resistant Single Hung. Within those lines, we handle everything from single sash replacements to full-frame retrofits. We stock common rollers, operators, weatherstripping, and lock hardware locally for Mr-Glass Windows & Doors in Pine Hills, FL and throughout Orlando so turnaround is faster on common repairs. For less common impact glass packs or full units, we order directly and schedule the install around the delivery. If you tell us the model and year of your windows, we can usually tell you over the phone whether it’s a stock part call it (850) 613-9382 and ask for a quote.
We Also Service These Brands
We are not a single-brand shop. Along with Mr-Glass, we install and service PGT, CGI, CWS, and ES Windows products. That matters because when you have a mixed house that’s common in Orlando, with a Mr-Glass slider here and a PGT casement there, we can service everything in one visit. One crew, one invoice, one guarantee covering all of it.
FAQs – Mr-Glass Windows & Doors Service in Orlando
No. We are an independent Mr-Glass service provider in Orlando. We’re not affiliated with or authorized by Mr-Glass, and we don’t claim to be. What we have is field experience with their residential product lines, which honestly matters more when you’re diagnosing a sticking roller or a fogged sash.
For anything that affects weather sealing or impact rating, yes, we use OEM Mr-Glass hardware. For trim, rollers, and locks, we often use Type II anodized aftermarket parts because they hold up better in Orlando’s humidity than some original hardware. We’ll tell you which we’re using and why before you pay.
Most common repairs like roller replacement, casement operator rebuilds, or weatherstripping take one visit of two to four hours. Full sash or frame replacements may take several days depending on parts availability and how many windows are involved. We’ll give you a time estimate with your written quote.
We service and install the 7200 Series single hung, 7300 Series horizontal roller, 7600 Series casement, and 8010 Series impact-resistant single hung. If you have another Mr-Glass line, call (850) 613-9382 and we’ll tell you if we can help.
Some manufacturer warranties are voided by unauthorized service or non-OEM repair practices. We’re upfront about what we know and what we don’t. If your Mr-Glass product is still under factory warranty, check your warranty paperwork before you have independent work done. We’ll point you back to the manufacturer if that’s the right move for your situation.
Yes, in most cases you just need the roller and track replaced, not the whole sash. We do this repair regularly on Orlando 7300 Series horizontal rollers, including Mr Glass repair in Apopka, where the factory steel rollers have corroded into the aluminum track. We pull the sash, rebuild the track with a stainless roller set, and reseal the frame. The total cost for that repair typically runs $260 to $490 depending on the window size and condition of surrounding hardware. Call (850) 613-9382 for an exact quote, estimates are free.
Fogging between the glass means your sealed glass pack has failed, which is not repairable in place. Whether Mr-Glass covers it depends on your purchase date and your warranty terms. We can replace the glass pack on a 7200 Series single hung in most cases, and for a standard size that typically runs $310 to $580 including labor and resealing. If the sash itself is warped or cracked from the condensation cycling, we’ll quote the sash and glass together. Call (850) 613-9382 and we’ll price your exact window.
That grinding sound is almost always stripped gear teeth in the casement operator. The crank turns a gear set, and when those teeth strip after years of Orlando wind load and salt air, you hear the metal-on-metal grind. We rebuild the operator with fresh gearing and check the sash hinges in the same visit. That repair usually costs $190 to $380 per window. Call (850) 613-9382 to schedule a diagnosis.
No. Small cracks in the vinyl frame of an impact window mean the frame’s structural integrity is compromised. The glass may have held, but an impact-rated frame that’s cracked around the stress points will not hold rating when the next storm hits. We recommend a full frame replacement for that unit. The price depends on your window size and which Mr-Glass impact series you have, but expect $900 to $2,200 for a standard single-hung impact replacement through our Window Replacement services. Call (850) 613-9382 for an exact quote.
You can often reseal a leaking Mr-Glass bay window without replacing the whole unit. Leaks usually come from failed exterior sealant around the frame or damage to the flashing at the roof line above the bay. We’ll inspect the seal, identify where water is getting in, and quote the reseal work if the frame is sound. Reseal work typically runs $350 to $800 depending on the bay window size. If the frame is rotted or the glass packs are also compromised, we’ll tell you before we quote a replacement. Call (850) 613-9382 for an inspection.
Book Your Mr-Glass Service in Orlando, FL
If your Mr-Glass window is sticking, leaking, fogging, or showing cracks, call (850) 613-9382. We’ll schedule a diagnosis, give you a written quote before any work starts, and back the repair with our written guarantee. Spencer Odell and the Hale Windows Orlando crew service Mr-Glass product across Orlando, Lake County, and Orange County. Free estimates, straight answers, no pressure.
Written by Spencer Odell, Owner at Hale Windows Orlando, serving Orlando since 2009.
Six Reasons Homeowners Choose Hale Windows Orlando
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.